News
Semi-Flex PCB Manufacturing
Semi-Flex PCB Manufacturing
Semi-Flex PCBs are a cost-efficient solution to optimize a great number of projects. Made from FR4 material, which is...
How to Choose the Right Color for Your PCB
How to Choose the Right Color for Your PCB
Green used to be thought of as the typical PCB colour. The availability of various PCB colours has in...
Printed Circuit Boards: Common Problems and Best Ways To Fix Them
In the world of industrial electronics, the heart of many systems lies in printed circuit boards (PCBs). These small but mighty components are ...
How to Prevent Acid Traps
How to Prevent Acid Traps
An acid trap is an area of a PCB that holds corrosive chemicals that should be washed away. Acid traps can be hard to det...
Introduction to FPC White Film
Introduction to FPC White Film
White film refers to white solder mask, also known as white cover film, similar to white ink on a hard board, ...
The Surface Wettability of Circuit Board SMT Chip Processing You are here:
Surface wetting of SMT chip proofing refers to a phenomenon when the solder spreads and covers the surface of the metal to be soldered during sold...
3D Printing and its Advanced Technologies
In the world of advertisement, 3D painting is very much popular. This 3D technology can create some alluring effect to the overall advertising. The...
Printed Circuit Boards Glossary:Design,Fabrication and Assembly-Z
Z-Stroke
The movement of the head of a component placement machine in the vertical place for parts orientation and insertion.
Printed Circuit Boards Glossary:Design,Fabrication and Assembly-Y
Yield
The ratio of usable parts at the end of a manufacturing process to the number of components submitted for processing.
Printed Circuit Boards Glossary:Design,Fabrication and Assembly-W
Wicking
Capillary absorption of liquid along the fibres of the base material.
Whisker
A needle-shaped metallic growth on a printed circuit board.
W...
Printed Circuit Boards Glossary:Design,Fabrication and Assembly-V
Voltage Plane
A conductor or portion of a conductor layer on or in a printed board which is maintained at other than ground potential. It can also ...
Printed Circuit Boards Glossary:Design,Fabrication and Assembly-U
Unsupported Hold
A hole containing no conductive material nor any other type of reinforcement.
Underwriters’ Symbol
A logotype authorized for place...
-
Previous
- Page 1 of 8
- Next