What is Dielectric Constant in PCB?

What is Dielectric Constant’s significance?

The PCB dielectric constant is measured as the stuff electrical absorbency to total space electrical permeability, and it is air; its quantity may be determined using modes condenser models.

The dielectric constant is a vital information component for constructing thin-film condensers and under other situations in which material may be anticipated to enter a loop. A coating condenser is produced of the sample film to detect it. The dielectric constant is the combination of the capacitor of the condenser as a dielectric with the voltage of a condenser as a dielectric condenser. The dielectric constant must be lowered for sheets that should be utilized to isolate electrically. Conversely, the dielectric constant must be high for films used as a dielectric in a condenser to reduce the condenser measurements. Altitude and stream frequency influence the dielectric constant.

What is Dielectric Material?

fr4 dielectric constant

The dielectric is a substance that is weak in electrical conduction. So it’s an excellent Electromagnetic Field booster. Suppose for the electrical flux lines, the current flow between the charged sites of the considered different is kept at a low without disruption. In that case, the electrostatic fields may make electricity. This phenomenon is helpful for energy storage in gadgets. Dielectrics are also utilized in the building of electromagnetic transmission lines


Types of Dielectric Constant Material

The substances used in the electronics sector are categorized based on electrical conductivity. The three kinds are wires, semiconductors, and insulators. Dielectrics are designed to inhibit the passage of electricity. The functioning of the insulators is similar. The very recognized usage of dielectric material is seen in the condensers, where a semi medium isolates the conduction panels called an isolation material. Different condenser types are categorized according to the kind of insulating material used.

Dielectrics are often divided into two kinds.


Ø Dielectrics Active:

Dielectrics are put in the solid electric field directly to take the flow of work from them. These are called active dielectrics. All of those are easy to store the energy.

Ø Dielectrics Passive:

The load flow limitation by the dielectric is called a passive dielectric.

Dielectric materials are also categorized into three kinds depending on the condition of the substance. It is metals, liquids, and molecules.


Properties of Dielectric Material

The dielectric characteristics help us choose the finest one depending on its requirements. Some of the features are:

  • Dielectric materials are typically non-metallic. The impedance of such compounds is thus high.
  • The activation energy is significant and exceeds 3eV.
  • Electrons are exceptionally highly bonded to the nucleus.
  • The conductivity is extremely low due to the lack of electrons.
  • Permeability – The polarising behavior or dielectric nature may be anticipated using the allowability rating.
  • The dielectric constant is being used to quantify the dielectric polarisation intensity.

Dielectric characteristics of various components used in the manufacture and packaging of semiconductors play a significant role in attaining the intended efficiency of circuit boards. The majority of engineers who work in the semiconductor sector thus require a rudimentary knowledge of dielectric characteristics.

The permissiveness of dielectric material is an essential characteristic. The allowability is a measure of the material’s ability to be polarised by a magnetic charge.

The notion of permittivity is nevertheless more superficial to understand by first addressing a closely related characteristic, capability (C). Capacity is a capability of a medium to retain a cargo if it is fitted with a voltage and is best represented on an insulator placed between two parallel two coils.


FR4 Dielectric Constant

Slightly elevated and high-frequency panels need excellent dispersion estimates to guarantee system reliability and precise time to propagate. FR4 dielectric constant is the most common kind of PCB lamination and has well-documented material properties. Researchers have collected key FR4 material characteristics as dielectric FR4, thermal properties, and more. The Altium Designer features precise FR4 dielectric constant type computation and  high-speed PCB design capabilities.

PCB design  concept for professional usage is the most powerful, contemporary, and simple to use.

Your PCB project begins with an isolating substratum which is usually comprised of FR4 as its base. The term “FR4” indicates the protective coating characteristics of the dialectic material and the epoxy composite used to make up the substratum for woven glass strengthened type-4. This laminate substance is highly isolated and stiff and should be used as a foundation material for all producers.

An essential factor in the construction of PCBs using FR4 laminates is to recognize their material characteristics, including their dielectric and thermal conductivity. Then, you may create a precise resistance characteristic for your super fast PCB and perform accurate signal quality simulations using the correct software and resources in the kit. Altium Designer offers the capabilities for stacking the dielectric constant and thermal characteristics of FR4 and other stuff to build your latest high-speed PCB in your experiments.

High-performance FR4 Dielectric Constant

370HR dielectric constant is an FR-4 Micro Printed wiring network with an elevated 181°C to in which high thermal conductivity and durability are requested. 370HR composite and prepreg products are produced of a unique multipurpose epoxy high-performance resin strengthened by an electric quality glass fabric.

Compared to conventional FR-4, this technology offered better thermal performance and reduced reveal higher while maintaining FR-4 flowability. Besides this better thermal performance, the chemical, mechanical, and humidity-resistant characteristics of all FR-4 materials comparable to or surpass their effectiveness. The 370HR dielectric constant technology additionally provides laser fluoridation and UV filtering for maximal interaction with automated, visual, and photographic solder mask spectrometer. 370HR proved best in the consecutive laminating class.

FR4 Dielectric Material

FR-4 refers specifically to a product grade instead of a substance which is a plastic resin for epoxy composite glass-reinforced substance. FR-4 consists of a woven fiberglass sheet with a flame protective epoxy resin base. And FR is fire resistant and indicates that the component conforms with the  UL94V-0  certification.

Difference between FR-4 material and Rogers material

  • Material FR-4 is affordable than stuff from Rogers dielectric constant.
  • Rogers substance is excellent with higher frequency compared to FR-4 technology.
  • Material FR-4 has a significant dissipation factor, greater signal loss than material from Rogers.
  • Rogers dielectric constant material offers a broader spectrum of Dk numbers in impedance constancy than FR-4 substance.
  • For dielectric constants, FR-4 is about 4.4, lower than Rogers’ 6.14 to 11 substance.
  • The Rogers materials have less fluctuation in temperature regulation compared to the FR-4 material.

Leave a comment

Please note, comments must be approved before they are published