L298N motor drive board module | | DC stepper motor robot intelligent car drive accessories

L298N motor drive board module | | DC stepper motor robot intelligent car drive accessories

Regular price $1.62 Sale

Notes:

1. When your driving voltage (marked as 12V input in the figure above, the actual acceptable input range is 7-12V) is 7V-12V, you can enable the onboard 5V logic power supply. After using the onboard 5V power supply, the +5V
power supply in the interface does not need to input voltage, but the 5V voltage can be drawn out for external use. (This is a conventional application!)

2. When the driving voltage is higher than 12V and less than or equal to 24V (the chip manual states that it can support up to 35V, but according to experience, it is already amazing that the 298 conservative application voltage supports 24V!), for example, to drive a motor with a rated voltage of 18V. First, you must remove the jumper cap of the onboard 5V output enable. Then connect 5V to the external 5V output port.

5V enable is a control signal with a level of 5V. When this signal input is valid and the power supply in the motor drive module is normal, the motor drive module outputs current. Otherwise, even if the power supply is normal, there is no current on the motor.

The voltage powers the internal logic circuit of L298N. (This is an unconventional application of high voltage drive!)

If you want to know more about the product(details+price), please send an email to sales@pcb-hero.com , and then we can talk in detail.